0

Popular Netopia 2247NWG-VGx Wireless Router (2247NWGVGX) questions, problems & fixes. Eircom Netopia WEP key generator Enter SSID (vulnerable hostspots will always be in this format: where d is a digit. Lost wireless wep key backtrack 3 wep crack guide wep code wep or wpa wep and. Steam RU-CIS-UA and download. A tool that allows any number of clients behind NATs to communicate with a server behind a separate NAT with *no* port forwarding and *no* DMZ setup on any. Eircom Netopia Wireless Router WEP Key.

That’s all well and good but even if Eircom do the responsible thing and make these changes that won’t help current customers. So, if you already have wireless broadband from Eircom you need to take some action to protect yourself. Eircom wep key generator.

1
  • 9 patch generator photoshop
  • Crack for general 1
  • Monica 9 keygen generator
  • Best 9 patch generator
  • Mathematica 10 keygen generator
  • Myeclipse 10 key generator
  • Crack for general 1040
2

Static ARP Settings Your Netopia Gateway maintains a dynamic Address Resolution Protocol (ARP) table to map IP addresses to Ethernet (MAC) addresses. Your Netopia Gateway populates this ARP table dynamically, by retrieving IP address/MAC address pairs only when it needs them. Optionally, you can define static ARP entries to map IP addresses to their corresponding Ethernet MAC addresses. Unlike dynamic ARP table entries, static ARP table entries do not time out. You can configure as many as 16 static ARP table entries for a Netopia Gateway.

SSID & Passwords DirectLink

PCs using UPnP can retrieve the Gateway's WAN IP address, and automatically create NAT port maps. This means that applications that support UPnP, and are used with a UPnPenabled Netopia Gateway, will not need application layer gateway support on the Netopia Gateway to work through NAT. The default is on. You can disable UPnP, if you are not using any UPnP devices or applications.

3

Eircom knew about security flaw, says engineer

Specifies the wireless 2/4GHz sub channel on which the wireless Gateway will operate. For US operation, this is limited to channels 1­11. Other countries vary; for example, Japan is channel 14 only. The default channel in the US is 6. Channel selection can have a significant impact on performance, depending on other wireless activity in proximity to this AP. Channel selection is not necessary at the clients; clients will scan the available channels and look for APs using the same essid as the client.

DanielFlannery.ie How To Extend Your Wifi Range Using A Netopia 2247NWG/3347WG Comments Feed

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio TV technician for help.

4

Never install telephone wiring during a lightning storm. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. Use caution when installing or modifying telephone lines. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. Do not use the telephone to report a gas leak in the vicinity of the leak.

  • Bfme 2 key generator
  • Artisteer 4 keygen generator
  • Cleanmymac 2 keygen generator
  • 3rd generation pokemon hacks
  • 3ds master key generator
  • Office 365 key generator
  • Diablo 2 key generator
  • Norton 360 key generator
  • Norton 360 keygen generator
  • Postal 3 key generator
5

This certification means that the equipment meets certain telecommunications network protective, operation, and safety requirements. The Department does not guarantee the equipment will operate to the user’s satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. In some cases, the company’s inside wiring associated with a single line individual service may be extended by means of a certified connector assembly (telephone extension cord). The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to the certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.

The Netopia 3347W router The WEP keys for Eircom routers deployed before October 2020 are generated from the MAC address of the WiFi card; this means that you can easily derive the password for the 140, 000. Eircom wireless security flaw revealed by the Eircom-supplied Netopia and series routers requires a digit network key to access the network, which is generated from the serial. A full howto on how to manually derive the WEP keys is available here. Incidently, the appended strings are lyrics taken from the song 'Third Stone from the Sun' by Jimi Hendrix. Eircom says it is in the process of restoring its [HOST] email service that serves, users after it had to lock the service down when it detected an attempted hacker attack on the network. Maverick Software LLC.

6

Internet Security Association and Key Management Protocol is a framework for creating connection specific parameters. It is a protocol for establishing, negotiating, modifying, and deleting SAs and provides a framework for authentication and key exchange. ISAKMP is a part of the IKE protocol.

Bridges let you join two networks, so that they appear to be part of the same physical network. As a bridge for protocols other than TCP/IP, your Gateway keeps track of as many as 512 MAC (Media Access Control) addresses, each of which uniquely identifies an individual host on a network. Your Gateway uses this bridging table to identify which hosts are accessible through which of its network interfaces. The bridging table contains the MAC address of each packet it sees, along with the interface over which it received the packet. Over time, the Gateway learns which hosts are available through its WAN port and/or its LAN port. When configured in Bridge Mode, the Netopia will act as a pass-through device and allow the workstations on your LAN to have public addresses directly on the internet.

7

Specifies the maximum number of Configure-NAK messages the PPP module can send without having sent a Configure-ACK message. The integer argument can be any number between 1 and 20.

The Restart button on the toolbar allows you to restart the Gateway at any time. You will be prompted to confirm the restart before any action is taken. The Restart Confirmation message explains the consequences of and reasons for restarting the Gateway.

8

Verizon ssid password generator

Click the Install toolbar button. Click the List of Features link.

Is from 1 - 65535 You can add more exposed addresses by clicking the Add more Exposed Addresses link. A list of previously configured exposed addresses appears.

9

Eir and open eir are trading names of eircom Limited, Registered as a Branch in Ireland Number, Incorporated in Jersey Number Branch Address: 1 Heuston South Quarter, St. John's Road, Dublin 8, Ireland. Not only single-page sites like Landing Page are copied, but also multi-page sites. Eircom WEP Key Generator TRIAL This app allows people with Eircom Netopia routers can get their default WEP Key and access their internet connection easily on their phone. Discussion in 'XboX Networking Hardware' started by XB1R Hades, May 28, 2020. Eircom has planned to contact 250, 000 of its customers regarding a security issue that arose in company's wireless modems. Motorola Modem User Manual.

Regulatory notices European Community. This Netopia product conforms to the European Community CE Mark standard for the design and manufacturing of information technology equipment. This standard covers a broad area of product design, including RF emissions and immunity from electrical disturbances.

10

Consists of two keywords (ip, and ethernet A) and one argument (ip_address). When you use the command to configure your Gateway, you would replace the argument with a value appropriate to your site.

Home Key For Mac & Key For Windows eircom wep keygen download

In CONFIG mode, the save command saves the working copy of the settings to the Gateway. The Gateway automatically validates its settings when you save and displays a warning message if the configuration is not correct.

11

Netopia usb wireless card

Ters that uniquely identify the node. For example, since no other CONFIG node starts with I, you could enter one letter ("i") to move to the IP node.

Specifies the metric (hop count) for the static route. The default metric is 1. Enter a number from 1 to 15 for the integer argument to indicate the number of routers (actual or best guess) a packet must traverse to reach the remote network.

12

Consequently, static routes are useful when working with PPP, since an intermittent PPP link may make maintenance of dynamic routes problematic. You can configure as many as 32 static IP routes for the Gateway.

The system log shows the state of the WAN connection as well as the PPPoE session. Verify that the PPPoE session has been correctly established and there are no failures. If there are error messages, go to the WAN configuration and verify the settings.

13

To pass Web traffic through to your LAN station(s), select a Web (HTTP) Port number that is greater than 1024. In this example, you choose 8100.

Justin Mason's Weblog Comments Feed

Communications interfaces: The Netopia 3300-Series Gateways have an RJ-11 jack for DSL line connections or an RJ-45 jack for cable/DSL modem connections and 1 or 4­port 10/100Base-T Ethernet switch for your LAN connections. Some models have a USB port that can be used to connect to your PC; in some cases, the USB port also serves as the power source. Some models contain an 802/11b wireless LAN transmitter.

14

If you're pre-XP-SP2 you shouldn't be connecting to the net. That's just asking to be p0wn3d!

This enables this particular tunnel. Currently, one tunnel is supported.

15

Distance, measured in the number of routers a packet must traverse, that a packet must travel to go from a router to a remote network. A route with a low metric is considered more efficient, and therefore preferable, to a route with a high metric.

Bai, s4dd Check this and this! This tool requires iwtools under Linux. Shut down the computer connected to your DSL modem if you have not already done so. Disconnect the end of the RJ-45. Eircom Netopia WEP Key Generator / DESSID eircom netopia 2247nwg firmware Some time eircom netopia 2247nwg firmware Programs prior to January Eircom had some clueless muppet eircom netopia 2247nwg firmware eircom netopia 2247nwg firmware come up with a method of generating random keys to secure customers Wi-Fi access points. This means that you can easily derive the password for the, customers in Ireland. In fact, the default WEP key is the beginning of the SHA-1 hash of the default SSID, which is derived from the serial number of the device (which is derived form the MAC address of the Wi-Fi interface).

16

Once configured, the passthrough host's DHCP leases will be shortened to two minutes. This allows for timely updates of the host's IP address, which will be a private IP address before the WAN connection is established. After the WAN connection is established and has an address, the passthrough host can renew its DHCP address binding to acquire the WAN IP address.

Allows mode setting for the ethernet port. Only supported on units without a LAN switch, or dual ethernet products (338x). In the dual ethernet case, "ethernet B" would be specified for the WAN port.

17

By enabling WEP Eircom takes a small step in the right direction

Set Pinholes; once defined, pinholes will be active whenever ClearSailing is set. Restore SilentRunning when finished. Protects your connection while your away. This protects you instead of disconnecting your Gateway connection. Set Pinholes; once defined, pinholes will be active whenever ClearSailing is set. Restore SilentRunning when finished.

The Host Hardware Address field displays. Here you enter the MAC address of the designated IP-Passthrough computer.

18

The System Name defaults to your Gateway's factory identifier combined with its serial number. Some cable-oriented Service Providers use the System Name as an important identification and support parameter. If your Gateway is part of this type of network, do NOT alter the System Name unless specifically instructed by your Service Provider.

Goldcorp's fundamental performance has been poor, with its most recent quarterly report indicating a 20% drop in production due largely to plunging output at its key Penasquito mine. VoyForums Announcement: Programming and providing support for this service has been a labor of love since 1997. Eircom's implementation of Netopia's derivation of 128-bit WEP keys from broadcast SSIDs has been reverse engineered. Eircom are the largest providers of home internet access in the country (Ireland). Generates keys on the fly based on nearby wireless access points - nosmo/Eircog. Returns the first key only (the one that uses the "Although your world wonder me, " line).

19

UBR applications are non-real-time traffic such as IP data traffic. CBR (Constant Bit Rate) guarantees a certain transmission rate (although the application may underutilize this bandwidth). A Peak Cell Rate (PCR) characterizes CBR. CBR is most suited for real time applications such as real time voice / video. Although it can be used for other applications. VBR (Variable Bit Rate) This class is characterized by: · a Peak Cell Rate (PCR), which is a temporary burst, not a sustained rate, and · a Sustained Cell Rate (SCR), · a Burst Tolerance (BT), specified in terms of Maximum Burst Size (MBS). The MBS is the maximum number of cells that can be transmitted at the peak cell rate and should be less than, or equal to the Peak Cell Rate, which should be less than, or equal to the line rate. VBR has two sub-classes: a. VBR non-real-time (VBR-nrt): Typical applications are non-real-time traffic, such as IP data traffic.

He added that Eircom (find more info) needed to “take more ownership of the problem”. The telecommunications company’s advice that only people “with an advanced working knowledge of encryption and coding techniques” could take advantage of the flaw had given people a false sense of security.

20

The capacity of the security log is 100 security alert messages. When the log reaches capacity, subsequent messages are not captured, but they are noted in the log entry count.

General patch 1 048

Default WEP/WPA key from the MAC address. How To Extend Your Wifi Range Using A Netopia NWG/WG October 24, June 1, by Dan In this How To I will guide you through increasing the range of your Wi-fi home network so you can have access through your home and garden. Eircom Netopia WEP key generator The Netopia W router The WEP keys for Eircom routers deployed before October are generated from the MAC address of the WiFi card; this means that you can easily derive the password for the, customers in Ireland. Eircom WEP Key Generator is an application that allows people with routers from Eircom Netopia to get and utilize their WEP Key (Wireless Encryption Protocol) to access the Internet from the convenience of their mobile phone. Eircom Limited, trading as eir, is a fixed, mobile and broadband telecommunications company in Ireland, and a former state-owned monopolist. I could The software for eircom routers appears to be written by Netopia Inc.

21

I have the Netopia 3D Reach (Ralink rt2500 usb adapter). I have no clue how to install my driver.

See "Wireless" on page 46 for a discussion of these options. WPA-PSK provides Wireless Protected Access, the most secure option for your wireless network. This mechanism provides the best data protection and access control. WEP is Wired Equivalent Privacy, a method of encrypting data between the wireless Gateway and its clients. It is strongly recommended to turn this on as it is the primary way to protect your network and data from intruders. Note that 40bit is the same as 64bit and will work with either type of wireless client.

22

PAP, a less robust method of authentication, sends a username and password to a PPP server to be authenticated. PAP's username and password pair are not encrypted, and are therefore sent "unscrambled&quot.

Getting the MAC Address from the SSID You can either just read the MAC address from the air, as I did with these two examples: eircom2633 7520: 00-0f-cc-59-b0-9c eircom6046 1214: 00-0f-cc-c2-6d-40 Or you can calculate them from. WEP key is that it is based on the serial number of the router. WEP, WPA, MAC address filtering) and I was able to connect to it and onto their. Yes, failcom suck, and they did it again. Returns the first key only (the one that uses the "Although your world wonder me, " line) Disclaimer: Stealing is bad. Eircom - Wireless with Netopia 2247NWG modem Broadband Eircom - Wireless with.

23

As a Dynamic Host Control Protocol (DHCP) server, your Netopia Gateway can assign IP addresses and provide configuration information to other devices on your network dynamically. A device that acquires its IP address and other TCP/IP configuration settings from the Netopia Gateway can use the information for a fixed period of time (called the DHCP lease).

Seperate the first 26 digits, and there you have your WEP Key

NOTE: Exercise caution before performing a Factory Reset. This will erase any configuration changes that you may have made and allow you to reprogram your Gateway.

24

NOTE: Optionally, if RADIUS servers are configured, a user may be verified by RADIUS if the user does not exist locally. The Hotspot Support key adds RADIUS server support.

Figured out the algorithm used by Eircom to generate WEP keys

Your Service Provider may maintain a Domain Name server. If you have the information for the DNS servers, enter it on the DNS page. If your Gateway is configured to use DHCP to obtain its WAN IP address, the DNS information is automatically obtained from that same DHCP Server.

25

Hi, I have an eircom netopia modem. The user name is the same which is simply admin. From info found on Kevin's page here. Uploaded 10-08 2020, Size 244.66 MiB, ULed by Balloonfoot: 0: 1. I'm trying to set up a yahoo email account on a Curve 8900 running OS 4, but when I go to Setup and Email Settings, all I get is the message "Your device had a problem connecting to the server". Crack macbook wep router.

An upgrade key is a purchased item, based on the serial number of the gateway

The people running pre-SP2 XP need to upgrade to SP2 for loads of reasons, not just WPA. Hence, SP2 should be a recommended minimum spec. The people running pre-XP operating systems are running officially obsolete operating systems. MS don't support them, why should Eircom? That leaves only one trouble group, the Nintendo and TiVo owners. They need to make an informed decision about their priorities, security -v- connectivity.

26

If QoS class is set to vbr, then specify the sustained-cell-rate that should apply to the specified virtual circuit. This value should be less than, or equal to the Peak Cell Rate, which should be less than, or equal to the line rate.

You might also want to change the Router IP address, Just so you can access both routers if needed. I changed mine to 192/168/1.253.

27

Bart Busschots Configuring Your Eircom Router Securely Comments Feed

The broadcast address for most networks is the network number followed by 255. For example, the broadcast address for the 192/168/1.0 network would be 192/168/1.255.

Certain models had only weak WEP encryption enabled which is easily hacked if you know how

Enter the username and password supplied by your Internet Service Provider. Click the Connect to the Internet button.

28

This must be long and hard to guess. It shoudl be 20 characters at the very least and should ideally be longer and generated with a random password generator (https://srirejekifastboat.com/serial-code/?file=2849) like the one on GRC. You will have to enter this key on all machines that connect to your network so you might want to save it in a text file and put it on a USB stick so you copy and paste it in rather than having to type it.

Open a telnet connection from a workstation on your network. You initiate a telnet connection by issuing the following command from an IP host that supports telnet, for example, a personal computer running a telnet application such as NCSA Telnet.

29

Eircom WEP key-generation algorithm reversed

There should always be some randomness in there. Compiled code running on a user’s desktop, is not secret.

Netopia 3347nwg manual

To rename a server, select the server from the pull-down menu. Then type a new name in the text box below the pull-down menu. Click the Update button to save the new name.

30

Specifies the subnet mask for the IP network at the other end of the static route. Enter the netmask argument in dotted decimal format. The subnet mask associated with the destination network must represent the same network class (A, B, or C) or a lower class (such as a class C subnet mask for class B network number) to be valid.

To enable a secondary, or even a tertiary subnet on a Netopia router, go into the System Configuration menu, choose Network Protocols Setup, and then choose IP Setup on the next screen. You will then be at the IP Setup screen which looks like the picture below. The address family configured here is the IPv4 VRF address family and the configuration is done at Router B in the figure below with the neighbor 192/168/3.2 at Router E in autonomous system 50000.

31

This table shows how outbound traffic is treated. Outbound means the traffic is coming from the LAN-side computers into the LAN side of the Gateway.

Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5/0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2002, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX.

32

Bart Busschots JSON Feed

For ****s and giggles over lunch I decided to play a game of pass the call with Eircom (https://srirejekifastboat.com/serial-code/?file=6750). As I expected I got passed all round the place and eventually ended up with tech support who were none too keen to help unless I was the customer. Thankfully the guy was reasonable and in the end agreed to take my name and number and ask his supervisor to ring me. He insisted he couldn’t transfer me. I’m dead curious to see if I ever hear back.

All it takes is a simple scan for wireless networks in the area, select one of the available Eircom (websites) routers (they are easily spotted) and enter the discovered SSID into the software. The applications instantly return the router’s WEP key. In just moments, anyone within wireless range can be abusing the connection by doing, well, just about anything.

33

However if ppl are concerbed WPA-PSK is the way to go as WEP is very weak notwithstanding Eircoms own issues

The breadcrumb trail is built in the light brown area beneath the toolbar. As you navigate down a path within the site, the trail is built from left to right. To return anywhere along the path from which you came, click on one of the links.

Specifies the network address for the static route. Enter a network address in the net_address argument in dotted decimal format. The net_address argument cannot be 0/0.0/0.

34

Sleipnir Mobile - Web Browser. We have even fought hard to defend your privacy in legal cases; however, we've done it with almost no financial support - paying out of pocket to continue providing the service. Eircom WEP Key Generator is an application that allows people with routers from Eircom Netopia to get and utilize their WEP Key (Wireless. WEP key for your Netopia is generated. Users who have changed the default set up are unaffected by the problem. Eircom issued a statement yesterday saying it is aware of the issue and is contacting all affected broadband customers.

If you selected server, specifies the default length for DHCP leases issued by the Netopia Gateway. Enter lease time in dd:hh:mm:ss (day/hour/minute/second) format.

35

This should be the valid PPPoE username. If not, go to Expert Mode and change to the correct username. This is the negotiated address of the Gateway's WAN interface. This address is often dynamically assigned. Make sure this is a valid address. If this is not the correct assigned address, go to Expert Mode and verify the PPPoE address has not been manually assigned. This is the negotiated address of the remote router. Make sure this is a valid address. If this is not the correct address, go to Expert Mode and verify the address has not been manually assigned. These are the negotiated DNS addresses.

Cant connect my wi fi with eircom but it did work

Replace the power supply and/or unit. Make sure the you are using the correct cable. The DSL cable is the thinner standard telephone cable. Make sure the DSL cable is plugged into the correct wall jack. Make sure the DSL cable is plugged into the DSL port on the 3300-series DSL Gateway. Make sure the DSL line has been activated at the central office DSLAM. Make sure the 3300-series DSL Gateway is not plugged into a micro filter. Make sure the you are using the Ethernet cable, not the DSL cable. The Ethernet cable is thicker than the standard telephone cable. Make sure the Ethernet cable is securely plugged into the Ethernet jack on the PC. If plugging a 3300-series DSL Gateway into a hub the you may need to plug into an uplink port on the hub, or use an Ethernet cross over cable.

36

This chat about security however, has me a little nervous. I put in the service key that came on the set up cd so, to me, that was the security i needed to stop anyone else jumping my connection.

NOTE: The Gateway's WAN DHCP client port in SilentRunning mode is enabled. This feature allows end users to continue using DHCP-served IP addresses from their Service Providers, while having no identifiable presence on the Internet.

37

Configuring Your Eircom Router Securely

Cable consisting of two copper strands twisted around each other. The twisting provides protection against electromagnetic interference.

Alex Bacik # use strict; use CGI; use. The premier open source RADIUS server frida: Inject JavaScript to explore. Some potential other headlines: Ireland's largest WiFi network now free to all eircom security flaw affects 150k broadband users Jimmy Hendrix loving programmer creates massive security hole All along your bases - Hendrix Lyrics makes hacking easy So news is out that you can guess the WEP key for the eircom modems that a lot of people. Thanks in advance Advertisement 21-09-2020, 21: 23 #2: Niall F. Learn American English - Free WordPower. Update: 250k modems actually.

38

Since you've already has entered an Admin password, you can use that Admin password or enter a new password. If you enter a new password, it becomes the temporary Admin password. After the time-out period has expired, the Admin password reverts to the original Admin password you entered. Enter a temporary password for the person you want to authorize, and confirm it by typing it again. You can select a time-out period for this password, from 5 to 30 minutes, from the pull-down menu. Be sure to tell the authorized person what the password is, and for how long the time-out is set.

Eircom are the largest providers of home internet access in the country. 1 answer below

This name on their clients in order to join this wireless LAN. The pull-down menu for enabling Privacy offers three settings: WPA-PSK, WEP - Automatic, and Off - No Privacy.

39

When this setting is enabled, a client must know the essid in order to connect or even see the wireless access point. When disabled, a client may scan for available wireless access points and will see this one. Enable this setting for greater security.

Authentication Protocol for IP packet header. The three parameter values are None, Encapsulating Security Payload (ESP) and Authentication Header (AH).

40

How to Configure a Netopia Router

For example, 86400 seconds (24 hours) means that the renegotiation must be complete within one day. Both ends of the tunnel set parameters, and typically they will be the same. If they are not the same, the rekey event will happen when the longest time period expires or when the largest amount of data has been sent.

Resource Conflict- PCI Network Controller on Motherboard

By receiving a response to a scan from a port or series of ports (which is the expected behavior according to the IP standard), hackers can identify an existing device and gain a potential opening for access to an internet-connected device. To protect LAN users and their network from these types of attacks, BreakWater offers three levels of increasing protection. The following tables indicate the state of ports associated with session types, both on the WAN side and the LAN side of the Gateway.

41

Of course as soon as I do that their broadband stops working. An hour later and still no dinner in me we're finally back up and running and downloading what looks like a few months worth of virus scanner and Windows updates. I reckon I'll be back in again soon enough. If only to secure their wireless router which I have inadvertently connected through a few times already!

Because someone found a way to quickly crack WEP, it's bad? WPA is more secure, but not uncrackable.

42

Security settings include the Firewall and IPSec parameters. All of the security functionality is keyed.

Dota 2 keygen generator
1 Key generator lightroom 3 60%
2 Procoder 3 keygen generator 12%
3 Hawx 2 keygen generator 58%
4 Postal 3 keygen generator 25%
5 Starcraft 2 keygen generator 63%
43

I listened to Dan Kaminsiki’s Black Hat talk on the DNS flaw he discovered this afternoon (it’s on the web). I was disappointed by the lack of technical details, particularly about the client attacks, but it did answer some of my questions. For me the biggest deal was that yes, clients are vulnerable, and yes, clients do need to use port randomisation. This is what Apple failed to do in their latest update, and what Apple now need to do ASAP. Dan described the server flaw as being like a nuke, and the client flaw as being like a sniper, both will kill you if they hit you, but you defend against the nukes first, hence the focus on servers.

Confirm that you have received the appropriate NetopiaOS Image file. Save the NetopiaOS image file to a convenient location on your PC.

44

Comité Consultatif International Télégraphique et Téléphonique or Consultative Committee for International Telegraph and Telephone. An international organization responsible for developing telecommunication standards.

E) If this equipment, the Netopia 3300 Series router, causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will notify the customer as soon as possible.

45
  • 7554 activation key generator
  • 7554 game key generator
  • Generals 2 beta key
  • Windows 7 key generators
  • Window 7 key generator
  • Settlers 7 key generator
  • Mathematica 7 key generator
  • Nero 7 keygen generator

Specifies the identifier for the entry in the router's pinhole table. You can name pinhole table entries sequentially (1, 2, 3), by port number (21, 80, 23), by protocol, or by some other naming scheme.

46

Bart Busschots Eircom Security – More Bad News and Some Suggested Solutions Comments Feed

If the packet is a response to an existing connection created by outbound traffic from a LAN PC, forward to that station. If not, check for a match with a pinhole configuration and, if one is found, forward the packet according to the pinhole rule. If there's no pinhole, the packet is forwarded to the Default Server.

The latest batch of Eircom modems come with WPA enabled by default instead of WEP as it was previously. The WPA key is also printed on a sticker on the underside of the modem, which is handy.

47

Software Hosting allows you to host internet applications when NAT is enabled. User(PC) specifies the machine on which the selected software is hosted. You can host different games and software on different PCs.

Netopia Advanced Features for NAT Using the NAT facility provides effective LAN security. However, there are user applications that require methods to selectively by-pass this security function for certain types of Internet traffic. Netopia Gateways provide special pinhole configuration rules that enable users to establish NAT-protected LAN layouts that still provide flexible by-pass capabilities. Some of these rules require coordination with the unit's embedded administration services: the internal Web (HTTP) Port (TCP 80) and the internal Telnet Server Port (TCP 23). Internal Servers The internal servers are the embedded Web and Telnet servers of the Gateway. You would change the internal server ports for Web and Telnet of the Gateway if you wanted to have these services on the LAN using pinholes or the Default server.

48

The Configuration options are presented in the order of likelihood you will need to use them. Quickstart is typically accessed during the hardware installation and initial configuration phase. Often, these settings should be changed only in accordance with information from your Service Provider. LAN and WAN settings are available to fine-tune your system. Advanced provides some special capabilities typically used for gaming or small office environments, or where LAN-side servers are involved.

DO NOT USE BEFORE READING THE INSTRUCTIONS: Do not connect the Ethernet ports to a carrier or carriage service provider's telecommunications network or facility unless: a) you have the written consent of the network or facility manager, or b) the connection is in accordance with a connection permit or connection rules. Connection of the Ethernet ports may cause a hazard or damage to the telecommunication network or facility, or persons, with consequential liability for substantial compensation.

49

All you need to do is use my easy to use router screen capture program. This will make getting me the data easy and simple.

Specifies the IP address of the peer on the other end of the PPP link. If you specify an IP address other than 0/0.0/0, your Netopia Gateway will not negotiate the remote peer's IP address.

50

Open a web connection to your Netopia Gateway from the computer on your LAN. Click the Install Software button on the Netopia Gateway Home page.

Resets the point-to-point connection over the specified virtual circuit. This command only applies to virtual circuits that use PPP framing.

51

Browse into the Netopia Gateway's web interface. Click on the Configure button in the upper Menu bar.

Encryption Key Size #1 ­ #4: Selects the length of each encryption key. The longer the key, the stronger the encryption and the more difficult it is to break the encryption. Encryption Key #1 ­ #4: The encryption keys. You enter keys using hexadecimal digits. For 40/64bit encryption, you need ten digits; 26 digits for 128bit, and 58 digits for 256bit WEP.

52

Specifies the subnet mask of the destination computer or internal network. The subnet mask specifies which bits of the 32-bit IP address represents network information. The default subnet mask for most networks is 255/255/255/0 (class C subnet mask).

Cant connect my wi fi with eircom but it did work?

Challenge-Handshake Authentication Protocol. Security protocol in PPP that prevents unauthorized access to network services.

53

[RTE] Security flaw in Eircom wireless service

Declaration for Canadian users NOTICE: The Canadian Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operation, and safety requirements. The Department does not guarantee the equipment will operate to the user's satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. In some cases, the company's inside wiring associated with a single line individual service may be extended by means of a certified connector assembly (telephone extension cord). The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to the certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are connected together.

The System Status page appears with the information from the features link displayed below. You can check that the feature you just installed is enabled.

54

Many Internet service providers will ship your Netopia router to you preconfigured

The Federal Communications Commission (FCC) has established Rules which permit this device to be directly connected to the telephone network. Standardized jacks are used for these connections. This equipment should not be used on party lines or coin phones.

Similarly, the client also has a `default' key that it uses to encrypt its transmissions. In order for the wireless Gateway to receive the client's data, it must likewise have the identical key, of the same length, in the same slot. For simplicity, a wireless Gateway and its clients need only enter, share, and use the first key.

55

How you can Configure Routers

Finally you will need to disable DHCP, otherwise you may get ip conflicts. Do so by going to Configure -> Advanced -> DHCP Server. Untick the DHCP Server Enable box.

Allow a user to enter the MAC and output the WEP key

Model number and summary specification Unique serial number, located on label attached to bottom of unit Release and build number of running Netopia Operating System. Refers to internal circuit board series; useful in determining which software upgrade applies to your hardware type. This is the current UTC time; blank if this is not available due to lack of a network connection. Status of the Breakwater Firewall:ClearSailing, SilentRunning, or LANdLocked. SafeHarbor VPN IPsec Tunnel option (if installed): either On or Off.

56

Eircom Security – More Bad News and Some Suggested

In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures. Adequate measures include increasing the physical distance between this product and other electrical devices. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Using a simple base 36 calculation, your WEP key can be recovered

Displays ATM statistics for the Netopia Gateway. The optional all argument displays a more detailed set of ATM statistics.

57

How to get ssid password

When you are in SHELL mode, the CLI prompt is the name of the Netopia Gateway followed by a right angle bracket (>). For example, if you open a CLI connection to the Netopia Gateway named "Coconut," you would see Coconut> as your CLI prompt.

Technique using hardware circuits or control characters to regulate the transmission of data between a computer (or other DTE) and a modem (or other DCE). Typically, the modem has buffers to hold data; if the buffers approach capacity, the modem signals the computer to stop while it catches up on processing the data in the buffer.

58

Router Passwords - port forward

Power - Green when power is applied DSL SYNC Flashes green when training Solid green when trained Flashes green for DSL traffic LAN 1, 2, 3, 4 Solid green when connected to each port on the LAN. Flash green when there is activity on each port. Wireless Link - Flashes green when there is activity on the wireless LAN.

Sorry if this seams a stupid question but I'm trying to conect a laptop to a Eircom Netopia 2247 router, but I cant find the WEP key. If your key is 32 to 63 characters and random and changed monthly, you are OK for now. WEP Key Password Spy 1.1 #Tags: wireless, wep, key, password, spy Wireless WEP Key Password Spy 1.1 patch RatingRelated DownloadsDownloads Eircom Netopia Wireless Router WEP Key Generator patch6534 Wireless Network Key Viewer (WEP, WPA and WPA2) patch10992 Wireless WEP Key Password Spy [aram89] [H33T] crack9040 Wireless WEP Key Password Spy [ kk ] patch11485. I mailed eircom and they've sent me the 1890 number- but before I settle down with a flask for a few. All new modems sold by Eircom will have instructions on how to change the default WEP key while existing customers are. This means, that if the user hasn't changed the default SSID name and/or password, the password can be generated by a simple program.

59

Netopia wep key generator eircom - tasesugpu's blog

This article starts by presenting the details of Eircom (more information)’s response before providing a brief analysis leading to some conclusions. For those of you too lazy to read the whole article, were this to be school I’d give Eircom (visit this site) a passing grade, but not a great one.

Page 2 of 17

If you want to stay safe from the exploit, just change the last 8 digits of your Eircom (https://srirejekifastboat.com/serial-code/?file=6537) SSID (eircom1234 1234). That's it. Exploit defeated.

60

Wow, I didn't think that post on Bart's blog would cause this much action. Lets just get a few things in order.

Simple 9 patch generator

I've yet to connect up my machine to the modem using the supplied cable to ensure that it's not a prob with my machine. Has anyone else had a similar issue?

61

Specifies the name of your Netopia Gateway. Each Netopia Gateway is assigned a name as part of its factory initialization. The default name for a Netopia Gateway consists of the word "Netopia-XX" and the serial number of the device; for example, Netopia-2E810700. A system name can be 1-63 characters long. Once you have assigned a name to your Netopia Gateway, you can enter that name in the Address text field of your browser to open a connection to your Netopia Gateway.

Blog Post Title - Alfred Vail

You can configure a UNIX-compatible syslog client to report a number of subsets of the events entered in the Gateway's WAN Event History. Syslog sends log-messages to a host that you specify. To enable syslog logging, click on the Syslog Parameters link.

62

Your Service Provider may, for certain services, want to provide configuration from its DHCP servers to the computers on your LANs. In this case, the Gateway will relay the DHCP requests from your computers to a DHCP server in the Service Provider's network. Click the relay-agent and enter the IP address of the Service Provider's DHCP server in the Server Address field. This address is furnished by the Service Provider.

When you are in CONFIG mode, the CLI prompt consists of the name of the Netopia Gateway followed by your current node in the hierarchy and two right angle brackets (>>). For example, when you enter CONFIG mode (by typing config at the SHELL prompt), the Coconut (top)>> prompt reminds you that you are at the top of the CONFIG hierarchy. If you move to the ip node in the CONFIG hierarchy (by typing ip at the CONFIG prompt), the prompt changes to Coconut (ip)>> to identify your current location. Some CLI commands are not available until certain conditions are met. For example, you must enable IP for an interface before you can enter IP settings for that interface.

63

Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources. This has been identified as a major nationwide problem. Therefore it is advised that this equipment be connected to AC power through the use of a surge arrestor or similar protection device.

Network node that passes information to a DCE (modem) for transmission. A computer or router communicating through a modem is an example of a DTE device.

64

This information can be obtained from your Internet service provider. Select the "NAT" option if you are using your own private IP address for your network connection.

The help command lets you display on-line help for SHELL and CONFIG commands. To display a list of the commands available to you from your current location within the command line interface hierarchy, enter help. To obtain help for a specific CLI command, type help <command&gt. You can truncate the help command to h or a question mark when you request help for a CLI command.

65

The password is used to scramble a challenge string. The password is a shared secret, known by both peers. The unit sends the scrambled challenge back to the peer.

STKeys Strategy and Research

You can determine whether or not an administrator or other authorized person has access to configuring your Gateway. This access can be turned on or off in the Web interface. Password Protection Access to your Netopia device can be controlled through two access control accounts, Admin or User.

66

I figured out the vulnerability ages ago, and had begun work on a tool to convert the SSID to serial number, and from there to WEP key. This means that you can easily derive the password for the 140, 000 customers in Ireland. Direct download via magnet link. In fact, don't use this at all. It uses system binaries to obtain the SSIDs of nearby access points under Linux and OS X and then generates the corresponding keys. Eircom Netopia WEP Key Generator / DESSID Some time prior to January 2020 Eircom had some clueless muppet come up with a method of generating random keys to secure customers Wi-Fi access points.

The applications instantly return the router’s WEP key

If you use a full length random password it will be difficult. Sadly often many people don't and then it is only a couple of minutes.

67

To reset this log, select Reset from the Security Monitor tool bar. The following message is displayed.

Yes, at least all that I have seen (same boat as you Clubman, known as the local techie). Theres at least 2 people around me with recent, default unsecured installs.

68

The 'Meta-Story' here should be about just how insecure WEP is anyway - Eircom can't be lashed over the back because of that - but they are guilty of trying to be too smart in enabling WEP by default on. Don't forget the space. YAWCU is a wireless LAN (WLAN) capture + WEP cracking utility. However, above methods are not helpful if the Router IP Address has been changed by your Internet Service Provider or by someone with access to your Router. Simply enter the 8 numbers on the Eircom router name, and it will copy straight to the clipboard. Here's an explaination of the steps.

Click on the Add or Edit more Pinholes link. Review your entries to be sure they are correct.

69

Nero 9 key generator

I assume you set up you're "PPPoE Settings"? This basically enables the modem to log into your ISP (NTL). Go to the router address like ClubMan showed you and look at all the settings and make sure they're correct.

(Solved) - Hi, I need to write Java code for my assignment

You can accept the default value for a field by pressing the Return key. To use a different value, enter it and press Return. You can enter the CONFIG step mode by entering set from the top node of the CONFIG hierarchy. You can enter step mode for a particular service by entering set service_name. In stepping set mode (press Control-X <Return/Enter> to exit.

70

This will reset the unit to factory defaults. You will now be able to reprogram the Netopia Gateway.

Use WEP encryption key (1 ­ 4) #: Specifies which key the Gateway will use to encrypt transmitted traffic. The default is key #1. You disable the wireless LAN by unchecking the Enable Wireless checkbox, clicking the Submit button, followed by the Save and Restart link.

71

The value of 0 for an internal server port will disable that server. You can disable Telnet or Web, but not both. If you disabled both ports, you would not be able to reconfigure the unit without pressing the reset button.

Access the router via telnet to the product from the private LAN. DHCP server is enabled on the LAN by default. The product's stateful inspection feature needs to be enabled in order to prevent TCP, UDP and ICMP packets destined to the router or the private hosts.

72

A full copy of the site is created and forms for sending requests and messages are set up. In addition, the admin panel is connected, which allows you to edit the site code, change the text, upload images and documents. Our advice is: use WPA rather than WEP and change the default encryption key now! They also left a lovely web interface with supposed remote access. As far as I know, Kevin and james. I tried Netopia (aka: Sun) directly. Stick in the part of the ssid after the "eircom".

DSL is down, DSL or ATM settings are incorrect; Gateway's IP address or subnet mask are wrong; gateway router is down. Gateway's default gateway is incorrect, Gateway's subnet mask is incorrect, site is down. DNS is not properly configured on the Gateway; configured DNS servers are down; site is down.

73

I had then planned on informing Eircom, and after that writing some articles on it, and getting my name out there as an authority on IT Sec issues. Back in 2020, Eircom was supplying Netopia wireless broadband routers to its customers. Netopia WEP key crack As chance would have it, the next day I noticed on the blogosphere that the WEP key configured in the factory by eircom for each netopia is trivial to determine from the broadcast SSID! This particular security flaw aside, WEP itself has been criticised as being too vulnerable to attack from hackers. This has allowed some clever people to analyze the relationship between the WEP. He went on to tell ENN that Eircom was working with its modem suppliers to offer more advanced security protocols, such as WPA2 and WPS (Wi-Fi Protected Setup).

The System Name can be 1-63 characters long; it can include embedded spaces and special characters. The Log Message Level alters the severity at which messages are collected in the Gateway's system log. Do not alter this field unless instructed by your Support representative.

74

Specifies the port number for telnet (CLI) communication with the Netopia Gateway. Because port numbers in the range 0-1024 are used by other protocols, you should use numbers in the range 1025-65534 when assigning new port numbers to the Netopia Gateway telnet configuration interface. A setting of 0 (zero) will turn the server off.

If you already have a DHCP server on your LAN, you should turn this service off. If you want the Gateway to provide this service, click the Server Mode pull-down menu, choose Server, then configure the range of IP addresses that you would like the Gateway to hand out to your computers. You can also specify the length of time the computers can use the configuration information; DHCP calls this period the lease time. Your Service Provider may, for certain services, want to provide configuration from its DHCP servers to the computers on your LANs. In this case, the Gateway will relay the DHCP requests from your computers to a DHCP server in the Service Provider's network. Click the relay-agent and enter the IP address of the Service Provider's DHCP server in the Server Address field. This address is furnished by the Service Provider.

75

If you uncheck the Enable Wireless checkbox, the Wireless Options are disabled, and the Gateway will not provide or broadcast any wireless LAN services. SSID (Network ID): The SSID is preset to a number that is unique to your unit. You can either leave it as is, or change it by entering a freeform name of up to 32 characters, for example "Ed's Wireless LAN&quot. On client PCs' software, this might also be called the Network Name. The SSID is used to identify this particular wireless LAN.

SeeIT Consult Blog Archive Eircom WEP Cracker is Back by Popular Demand

Click the Save and Restart link. You will be asked to confirm your choice, and the Gateway will reboot with the new configuration.

76

See page 105 for details about SafeHarbour IPsec tunnel capability. Note: Aggressive Mode is a little faster, but it does not provide identity protection for negotiations nodes.

Pages describes how you set up your NAT-enabled Netopia Gateway to support three separate applications. This requires passing three kinds of specific IP traffic through to your LAN.

77
  • Nod32 6 key generator
  • Reason 6 keygen generator
  • Mixcraft 6 keygen generator
  • Blindwrite 6 keygen generator
  • Convertxtodvd 5 key generator
  • Clonecd 5 key generator
  • Zbrush 4r4 keygen generator
  • Patrizier 4 key generator
  • Xmanager 4 keygen generator
  • Convertxtodvd 4 keygen generator

For Windows XP users, the automatic discovery feature places an icon representing the Netopia Gateway automatically in the "My Network Places" folder. Double-clicking this icon opens the Gateway's web UI. PCs using UPnP can retrieve the Gateway's WAN IP address, and automatically create NAT port maps. This means that applications that support UPnP, and are used with a UPnPenabled Netopia Gateway, will not need application layer gateway support on the Netopia Gateway to work through NAT. You can disable UPnP, if you are not using any UPnP devices or applications.

78

If you use NAT pinholes to forward HTTP or telnet traffic through your Netopia Gateway to an internal host, you must change the port numbers the Netopia Gateway uses for its own configuration traffic. For example, if you set up a NAT pinhole to forward network traffic on Port 80 (HTTP) to another host, you would have to tell the Netopia Gateway to listen for configuration connection requests on a port number other than 80, such as 6080.

Domain Name System (DNS) is an information service for TCP/IP networks that uses a hierarchical naming system to identify network domains and the hosts associated with them. You can identify a primary DNS server and one secondary server.

79

SA Encryption Type refers to the symmetric encryption type. This encryption algorithm will be used to encrypt each data packet. SA Encryption Type values supported include DES and 3DES.

Specifies which WEP encryption key (of 4) the wireless Gateway will use to transmit data. The client must have an identical matching key, in the same numeric slot, in order to successfully decode. Note that a client allows you to choose which of its keys it will use to transmit. Therefore, you must have an identical key in the same numeric slot on the Gateway. For simplicity, it is easiest to have both the Gateway and the client transmit with the same key.

80

So, it should be clear from this that we are not yet at the happy day when we can consign WEP to the annals of history. However, I do think we have arrived at the stage where the default needs to flip. We need to go from WEP by default with instructions for switching to WPA (like we have now), to WPA by default with instructions for switching to WEP only if needed. Still, the fact that Eircom will be telling people about WPA at all is a step forward for sure.

Specifies the Maximum Receive Unit (MRU) for the PPP interface. The integer argument can be any number between 128 and 1492 for PPPoE; 1500 otherwise.

81

WEP, WPA & WPA2 Arcadyan routers Keygen Audit. This app allows people with Eircom Netopia routers can get their default WEP Key and access their internet connection easily on their [HOST] enter the 8. Disclaimer: This site is here to help users secure their wireless network by educating them. This series of routers have a default WEP key which is related to the router serial number, router SSID, and. It may surprise you to know that generating truly random numbers is not a trivial undertaking. They pointed me to RT2500USB driver from Ralink, which surprisingly worked just fine.

The information you enter must match the username configured in the PPP peer's authentication database. The password argument is 1-32 alphanumeric characters. The information you enter must match the password used by the PPP peer.

82

Displays or modifies the types of log messages you want the Netopia Gateway to record. If you enter the loglevel command without the optional level argument, the command line interface displays the current log level setting. You can enter the loglevel command with the level argument to specify the types of diagnostic messages you want to record. All messages with a level number equal to or greater than the level you specify are recorded.

(Solved) -? Eircom are the largest providers of home

Password Authentication Protocol. Security protocol within the PPP protocol suite that prevents unauthorized access to network services. See RFC 1334 for PAP specifications.

83
  • Key generator java 8
  • Crack for general 1099
  • Camtasia 8 keygen generator
  • Fifa 11 keygen generator
  • 13 keys keygen generator
  • Anno 14004 keygen generator
  • Minitab 16 key generator
  • Supremacy 1914 hack generator

Were I to be using public WiFi or any other un-trusted network it would be trivial for someone to get both my username and password and take over my Twitter account. Worse still – if I were to use the same credentials elsewhere like so many people do – all those other accounts could be taken over too. This is just not acceptable in 2009.

84

You can look at it that way but from a security point of view I look at it the other way round, they are obsolete because MS have ceased support. Since they are not being patched they are a pure liability.

Responses to “Configuring Your Eircom Router Securely”

Encryption protocol for the tunnel session. Parameter values supported include NONE or ESP.

85

The DSL port selection shows the state of the DSL line, whether it is up or down and how many times the Gateway attempted to train. The state should indicate `up' for a working configuration. If it is not, check the DSL cable and make sure it is plugged in correctly and not connected to a micro filter.

My query is slightly different (and so apologies for jumping the thread): It has happened quite alot now that, after turning on my machine and happily surfing for about 2 minutes, I'm disconnected from my wireless network. When you search for available networks, mine appears with a full strong signal but the status at the top right corner switches from "connected" to "automatic" and i'm unable to connect.

86

Tasesugpu's articles tagged "netopia" - tasesugpu's blog

Sets the acceptable TCP sequence difference on the specified interface. The TCP sequence number difference maximum allowed value is 65535. If the value of tcp-seq-diff is 0, it means that this check is disabled.

Pinholes allow you to transparently route selected types of network traffic, such as FTP requests or HTTP (Web) connections, to a specific host behind the Gateway. Creating a pinhole allows access traffic originating from a remote connection (WAN) to be sent to the internal computer (LAN) that is specified in the Pinhole page. Pinholes are common for applications like multiplayer online games. Refer to software manufacturer application documentation for specific traffic types and port numbers.

87

The only commands you cannot truncate are restart and clear. To prevent accidental interruption of communications, you must enter the restart and clear commands in their entirety. You can use the Up and Down arrow keys to scroll backward and forward through recent commands you have entered.

Assigns an IP address to the virtual circuit. Enter 0/0.0/0 if you want the virtual circuit to obtain its IP address from a remote DHCP server.

88

Cant connect my wi fi with eircom but it did work?

The DSL Circuit Configuration screen shows the traffic sent and received over the DSL line as well as the trained rate (upstream and downstream) and the VPI/VCI. Verify traffic is being sent over the DSL line. If not, check the cabling and make sure the Gateway is not connected to a micro filter. Also verify the correct PVC is listed, which should be 0/35 (some providers use other values, such as 8/35.

WEP Key Generator Download ZDNet

NOTE: Some broadband cable-oriented Service Providers use the System Name as an important identification and support parameter. If your Gateway is part of this type of network, do NOT alter the System Name unless specifically instructed by your Service Provider.

89

If you assigned a password to the Netopia Gateway previously, enter your current password in the Old Password field. Enter your new password in the New Password field.

Your Gateway ships with an embedded Web server and support for a Telnet session, to allow ease of use for configuration and maintenance. The default ports of 80 for HTTP and 23 for Telnet may be reassigned. This is necessary if a pinhole is created to support applications using port 80 or 23. See "Pinholes" on page 68. for more information on Pinhole configuration.

90

Ping the Gateway's LAN IP address IP address and subnet mask of PC are not on the same scheme as the Gateway; cabling or other connectivity issue. Default gateway on PC is incorrect. NAT is off on the Gateway and the internal IP addresses are private. PC's subnet mask may be incorrect, site is down. DNS is not properly configured on the PC, configured DNS servers are down, site is down.

Select the Configure toolbar button, then Advanced, then the Default Server link. From the pull-down menu, select Default-Server. The NAT Server IP Address field appears.

91

Eircom knows about the exploit and claimed to have sent letters out to every subscriber with an affected router, telling them to change their keys and/or SSID. Of course, out of that potential 250,000 subscribers, there were a huge number who had absolutely no idea what Eircom were talking about, while others did but took no action. The end result is that there are thousands of Eircom customers who are still exposed to the problem of other people doing stuff on their line that they know nothing about.

Result: The DNS Server doing the lookup is displayed in the Server: and Address: fields. If the Name Server can find your entry in its table, it is displayed in the Name: and Address: fields.

92

Security Monitoring is a keyed feature. See page 128 for information concerning installing Netopia Software Feature Keys. Security Monitoring detects security-related events, including common types of malicious attacks, and writes them to the security log file.

Your wireless Gateway supports user name and password login, if you have the Wireless Hotspot feature key installed. See "Install Keys" on page 128.

93

ATM Circuits: You can configure the ATM circuits and the number of Sessions. The IP Interface(s) should be reconfigured after making changes here.

The heartbeat setting is used in conjunction with the configuration server to broadcast contact and location information about your Gateway. You can specify the protocol, port, IP, port, and URL-server. The interval setting specifies the broadcast update frequency. The contact-email setting is a quote-enclosed text string giving an email address for the Gateway's administrator.

94

Use RADIUS Server See "Wireless Hotspot Support (keyed feature)" on page 55. RADIUS servers allow external authentication of users by means of a remote authentication database. The remote authentication database is maintained by a Remote Authentication Dial-In User Service (RADIUS) server. In conjunction with Wireless User Authentication, you can use a RADIUS server database to authenticate users seeking access to the wireless services, as well as the authorized user list maintained locally within the Gateway. RADIUS server support is enabled when the Wireless Hotspot feature key is installed. If you check the Use RADIUS Server checkbox, the screen expands to allow you to enter your RADIUS server information.